Or as low as Description
Commercial data
| Item number | 2866310 |
| Packing unit | 1 pc |
| Minimum order quantity | 1 pc |
| Sales key | CMP |
| Product key | CMPU13 |
| Catalog page | Page 266 (C-4-2019) |
| GTIN | 4046356729192 |
| Weight per piece (incl. packing) | 187,02 g |
| Weight per piece (excl. packing) | 147 g |
| Customs tariff number | 85044095 |
| Country of origin | VN |
UNO-PS/1AC/24DC/ 30W – Power supply unit
Technical data
Input data
AC operation
| Parameter | Specification |
| Nominal Input Voltage Range | 100 V AC … 240 V AC |
| Input Voltage Range | 85 V AC … 264 V AC |
| Input Voltage Range AC | 85 V AC … 264 V AC |
| Voltage Type of Supply Voltage | AC |
| Inrush Current | < 30 A (typ.) |
| Inrush Current Integral (I2 t) | < 0.4 A2 s (typ.) |
| AC Frequency Range | 50 Hz … 60 Hz |
| Frequency range (fN ) | 50 Hz … 60 Hz ±10 % |
| Mains Buffering Time | > 25 ms (120 V AC)
> 115 ms (230 V AC) |
| Current Consumption | typ. 0.8 A (100 V AC)
typ. 0.4 A (240 V AC) |
| Nominal Power Consumption | 72.1 VA |
| Protective Circuit | Transient surge protection; Varistor |
| Power Factor (cos phi) | 0.47 |
| Typical Response Time | < 1 s |
| Input Fuse | 2 A (slow-blow, internal) |
| Recommended Breaker for Input Protection | 6 A … 16 A (Characteristics B, C, D, K) |
Output data
| Efficiency | typ. 87 % (120 V AC)
typ. 88 % (230 V AC) |
| Output characteristic | HICCUP |
| Nominal output voltage | 24 V DC |
| Nominal output current (IN) | 1.25 A (-25 °C … 55 °C) |
| Derating | 55 °C … 70 °C (2.5 %/K) |
| Feedback voltage resistance | < 35 V DC |
| Protection against overvoltage (OVP) | ≤ 35 V DC |
| Control deviation | < 1% (change in load, static 10% … 90%)
< 2% (change in load, dynamic 10% … 90%) < 0.1% (change in input voltage ±10%) |
| Residual ripple | < 60 mVPP (with nominal values) |
| Short-circuit-proof | yes |
| Output power | 30 W |
| Maximum no-load power dissipation < | 0.3 W |
| Power loss nominal load max. | < 5 W |
| Rise time | < 0.5 s (UOUT (10 % … 90 %)) |
| Response time | < 2 ms |
| Connection in parallel | yes, for redundancy and increased capacity |
UNO-PS/1AC/24DC/ 30W – Power supply unit
| Connection in series | yes |
Connection data
Input
| Connection method | Screw connection |
| Conductor cross section, rigid min. | 0.2 mm² |
| Conductor cross section, rigid max. | 2.5 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Single conductor/flexible terminal point with ferrule with plastic sleeve, max. | 2.5 mm² |
| Single conductor/flexible terminal point with ferrule without plastic sleeve, min. | 0.2 mm² |
| Single conductor/flexible terminal point with ferrule without plastic sleeve, max. | 2.5 mm² |
| Conductor cross section AWG min. | 24 |
| Conductor cross section AWG max. | 14 |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Tightening torque, min | 0.5 Nm |
| Tightening torque, max | 0.6 Nm |
Output
| Connection method | Screw connection |
| Conductor cross section, rigid min. | 0.5 mm² |
| Conductor cross section, rigid max. | 6 mm² |
| Conductor cross section flexible min. | 0.5 mm |
| Conductor cross section flexible max. | 4 mm² |
| Conductor cross section, AWG min | 20 |
| Conductor cross section AWG max. | 10 |
| Stripping length | 14 mm |
| Screw thread | M3 |
| Tightening torque, min | 0.5 Nm |
| Tightening torque, max | 0.6 Nm |
UNO-PS/1AC/24DC/ 30W – Power supply unit
Signaling
| Types of signaling | LED |
Electrical properties
| Number of phases | 1.00 |
| Insulation voltage output / PE | 4 kV AC (type test)
3 kV AC (routine test) |
Product properties
| Product type | Power supply |
| Product family | UNO POWER |
| MTBF (IEC 61709, SN 29500) | > 1158000 h (40 °C) |
Insulation characteristics
| Protection class | II (in closed control cabinet) |
| Degree of pollution | 2 |
Dimensions
| Width | 22.5 mm |
| Height | 90 mm |
| Depth | 84 mm |
Installation dimensions
| Installation distance right/left | 0 mm / 0 mm |
| Installation distance top/bottom | 30 mm / 30 mm |
Mounting
| Mounting type | DIN rail mounting |
| Assembly note | alignable: 0 mm horizontally, 30 mm vertically |
| Mounting position | Horizontal DIN rail NS 35, EN 60715 |
| With protective coating | No |
Material specifications
| Flammability rating according to UL 94 (housing / terminal blocks) | V0 |
| Housing material | Plastic |
| Housing material | Polycarbonate |
| Foot latch material POM | (Polyoxymethylene) |
Environmental and real-life conditions
Ambient conditions
| Degree of protection | IP20 |
| Ambient temperature (operation) | -25 °C … 70 °C
(> 55° C derating : 2.5%/K) |
| Ambient temperature (storage/transport) | -40 °C … 85 °C |
| Ambient temperature (start-up type tested) | -40 °C |
| Climatic class | 3K22 (in accordance with EN 60721-3-3) |
UNO-PS/1AC/24DC/ 30W – Power supply unit
| Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
| Shock | 18 ms, 30g, in each space direction (according to IEC 60068-2- 27) |
| Vibration (operation) | < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
15 Hz … 150 Hz, 2.3g, 90 min |
Standards and regulations
| Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations | EN 50178/VDE 0160 (PELV) |
| Standard – Limitation of mains harmonic currents | EN 61000-3-2 |
| Standard – Electrical safety | IEC 62368-1 (SELV) |
| Standard – Safety extra-low voltage | IEC 62368-1 (SELV) und EN 60204-1 (PELV) |
| Standard – Safe isolation | DIN VDE 0100-410 |
| Standard – Safety of transformers | EN 61558-2-16 |
| Approval – requirement of the semiconductor industry with regard to mains voltage dips | EN 61000-4-11 |
Mains voltage dips
| Standard designation | Requirement of the semiconductor industry with regard to mains voltage dips |
| Standards/specifications | SEMI F47 – 0706 (180 V AC) |
Approvals
| CSA | CAN/CSA-C22.2 No. 60950-1-07
CSA-C22.2 No. 107.1-01 CSA CAN/CSA-C22.2 No. 213 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location) |
| UL approvals | UL/C-UL listed UL 508
NEC Class 2 as per UL 1310 UL/C-UL Listed ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location) UL approvals UL/C-UL Recognized UL 60950-1 |
Conformity/Approvals
| SIL in accordance with IEC 61508 | 0 |
| Performance level according to ISO 13849 | without |
EMC data
| Low Voltage Directive | Conformance with Low Voltage Directive 2014/35/EC |
| EMC Requirements for Noise Emission | EN 61000-6-3
EN 61000-6-4 |
| EMC Requirements for Noise Immunity | EN 61000-6-1
EN 61000-6-2 |
| Electromagnetic Compatibility | Conformance with EMC Directive 2014/30/EU |
Electrostatic discharge
| Standards/Regulations | EN 61000-4-2 |
UNO-PS/1AC/24DC/ 30W – Power supply unit
Electrostatic discharge
| Contact discharge | 6 kV(Test Level 3) |
| Discharge in air | 8 kV (Test Level 3) |
| Comments | Criterion B |
Electromagnetic HF field
| Standards/regulations | EN 61000-4-3 |
Electromagnetic HF field
| Frequency Range | 80 MHz … 1 GHz |
| Test Field Strength | 10 V/m (Test Level 3) |
| Frequency range | 1 GHz … 6 GHz |
| Test field strength | 10 V/m (Test Level 3) |
| Comments | Criterion A |
Fast transients (burst)
| Standards/regulations | EN 61000-4-4 |
Fast transients (burst)
| Input | 4 kV (Test Level 4 – asymmetrical) |
| Output | 4 kV (Test Level 4 – asymmetrical) |
| Comments | Criterion B |
Surge voltage load (surge)
| Standards/regulations | EN 61000-4-5 |
Surge voltage load (surge)
| Input | 1 kV (Test Level 2 – symmetrical)
2 kV (Test Level 3 – asymmetrical) |
| Output | 0.5 kV (Test Level 1 – symmetrical)
1 kV (Test Level 2- asymmetrical) |
| Comments | Criterion B |
Conducted interference
| Standards/regulations | EN 61000-4-6 |
Conducted interference
| Frequency Range | 0.15 MHz … 80 MHz |
| Comments | Criterion A |
| Voltage | 10 V (Test Level 3) |
Conducted interference
| Input/Output | asymmetrical |
| Frequency Range | 0.15 MHz … 80 MHz |
| Comments | Criterion A |
| Voltage | 10 V (Test Level 3) |
Voltage dips
| Standards/regulations | EN 61000-4-11 |
| Voltage | 230 V AC |
| Frequency | 50 Hz |
| Voltage dip | 70 % |
UNO-PS/1AC/24DC/ 30W – Power supply unit
| Number of periods | 25 periods |
| Additional text | Class 3 |
| Comments | Criterion A |
| Voltage dip | 40 % |
| Number of periods | 10 periods |
| Additional text | Class 3 |
| Comments | Criterion A |
| Voltage dip | 0 % |
| Number of periods | 1 period |
| Additional text | Class 3 |
| Comments | Criterion A |
Emitted interference
| Standards/regulations | EN 61000-6-3 |
| Radio interference voltage in acc. with EN 55011 | EN 55011 (EN 55022) class B used in industry and residential area / EMC 1 |
| Emitted radio interference in acc. with EN 55011 | EN 55011 (EN 55022) class B used in industry and residential area / EMC 1 |
Criteria
| Criterion | A Normal operating behavior within the specified limits. |
| Criterion B | Temporary impairment to operational behavior that is corrected by the device itself |
UNO-PS/1AC/24DC/ 30W – Power supply unit
Classifications
ECLASS
| ECLASS-11.0 | 27040701 |
| ECLASS-13.0 | 27040701 |
| ECLASS-12.0 | 27040701 |
ETIM
| ETIM 9.0 | EC002540 |
UNSPSC
| UNSPSC 21.0 | 39121000 |
UNO-PS/1AC/24DC/ 30W – Power supply unit
Environmental product compliance
EU RoHS
| Fulfills EU RoHS substance requirements | Yes |
| Exemption | 6(c), 7(c)-I |
China RoHS
| Environment friendly use period (EFUP) | EFUP-25
An article-related China RoHS declaration table can be found in the download area for the respective article under “Manufacturer declaration”. For all articles with EFUP-E, no China RoHS declaration table issued and required |
EU REACH SVHC
| REACH candidate substance (CAS No.) | Lead(CAS: 7439-92-1) |
| SCIP | 05b42b3b-0bf7-4e8c-94e6-1ecaf9319514 |
EF3.0 Climate Change
| CO2e kg | 3,657 kg CO2e |
UNO-PS/1AC/24DC/ 30W – Power supply unit
Accessories
UNO-DIODE/5-24DC/2X10/1X20 – Redundancy module
Redundancy module, 5 V – 24 V DC, 2 x 10 A, 1 x 20 A.
CBMC E4 24DC/1-4A NO – Electronic circuit breaker
Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
UNO-PS/1AC/24DC/ 30W – Power supply unit
CBMC E4 24DC/1-10A NO – Electronic circuit breaker
Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails.
PLT-SEC-T3-230-FM-UT – Type 3 surge protection device
Type 2/3 surge protection, consisting of protective plug and base element with screw connection. For single-phase power supply network with integrated status indicator and remote signaling. Nominal voltage: 230 V AC/DC
UNO-PS/1AC/24DC/ 30W – Power supply unit
PLT-SEC-T3-24-FM-UT – Type 3 surge protection device
Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 24 V AC/DC
