Description
Technical Information
- Input Voltage – 85~264VAC (120~370VDC)
- Input Current – 5A
- Input Frequency – 47~63Hz
- Inrush Current – cold start, 20A/115V, 40A/230V
- Input Leakage Current – < 1mA/230VAC
- Line Regulation (full load) – ± 0.5%
- Voltage Adjust Range – ± 10%
- Output Overload Protection – 105~150%, hiccup mode, auto recovery
- Output Over Voltage Protection – 105~150%, hiccup mode, auto recovery
- Short Circuit Protection – hiccup mode, auto recovery
- Rise Time – 50ms @full load (typical)
- Hold Up Time – 20ms @full load (typical)
- Mechanical Feature – enclosed
- Operating Temperature – -20°C ~+70°C(ref. derating curve)
- Storage Temperature – -20°C ~+85°C
- Operating Humidity – 20%~93%RH(non condensing)
- Storage Humidity – 20%~95%RH(non condensing)
- MTBF – >100,000 hours
- Cooling – convection
- Safety Standards – GB4943, UL60950, EN60950
- EMC Standards
- GB9254, EN55022 Class B
- EN55024, EN61000-3 2,3
- EN61000-4 2,3,4,5,6,8,11
- Withstand Voltage
- I/P –O/P: 3.0KVAC/1minO/P: 3.0KVAC/1min
- I/P — PE: 1.5KVAC/1minPE: 1.5KVAC/1min
- O/P–PE: 0.5KVAC/1minPE: 0.5KVAC/1min
- Vibration
- 10~150Hz, 2G 10min/1cycle
- 30min each along X, Y, Z axes
- Connection – 5P/9.5mm screw terminal block
- Packing – 0.37kgs, 42pcs/17.5kgs/0.035CBM per carton
Note
- All parameters are measured at 230VAC input, rated load and 25°C ambient temperature.
- Line regulation is measured from low line to high line at rated load.
- Load regulation is measured from 0% to 100% of rated load for single output models. For multi-output models, it is measured from 20% to 100% of rated load, and other output at 60% rated load.
- Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor.
- The power supply is regarded as a component which will be installed into the final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
